Building Lathe Cross Slide

admin   December 5, 2016   Comments Off on Building Lathe Cross Slide

Building lathe cross slide

In this metalworking project jim walks us through the steps required to build a handy cross slide retractor for the lathe. this modification simplifies the threading. Taig lathe tips and tricks. new tips above the old ones. updated december 13th, 2014. i am a new taig owner, didn’t know about you before i bought mine from the. Intro: concrete metal lathe. i’ve wanted a large cnc lathe for a long time…key ingredient to that being a large lathe. unfortunately most places that sell these.

The back plate also holds the feed screw in position. It is screwed ...

The back plate also holds the feed screw in position. it is screwed

... lathe cross slide lever mounted watchmakers lathe cross slide

… lathe cross slide lever mounted watchmakers lathe cross slide

The primary slide plate. This is 4"x4" aluminum, with more CRS for the ...

The primary slide plate. this is 4"x4" aluminum, with more crs for the

The lathe is an ancient tool, dating at least to ancient egypt and known to be used in assyria and ancient greece. the lathe was very important to the industrial. Introduction (02-15-13) recently arrived at mini-lathe.com world headquarters is the new sieg c8 lathe. in development for some time, the c8 has now joined sieg’s. About this web page (04/03/12) after more than ten years working with several versions of the c2 mini lathe, the c4 mid-size lathe and the c6 lathe, i found that i.